    
|
|
|
 |
|
Stand Alone Rudder Angle Indicator The ComNav Stand Alone Rudder Angle Indicator System is a complete single station RAI system. This is typically used on vessels that do not have a ComNav Autopilot or in cases where a separate RAI system is required (such as Hydraulic Full Follow-up steering systems). A rudder angle indicator displays the actual position of a boat's rudder. If the boat experiences a power failure, so does the indicator. This unique Stand Alone system provides continued operation in case of power loss. The key feature of this system is its built-in power failure indication and power failure backup. The RAI meters provide initial warning of power loss and continue to work for up to one hour after power failure by utilizing a set of internal batteries. This RAI system is capable of operating up to 15 ComNav indicator meters, and many of its standard features and options are only available on more expensive systems. |
|
|
Jog Switch The ComNav NFU Jog Switch is a permanently mounted, watertight, electrical switch specifically designed for marine service. The spring-centred lever is moved to Port or Starboard as desired to provide non follow-up (time dependent) electrical control of the vessel steering system. The Jog Switch can work in conjunction with any autopilot system or can be installed and used as a stand alone system. |
|
|
Remote Expander The ComNav Remote Expander is used to increase the number of remotes that can be connected to ComNav 1001, 1101, 1201 and 2001 Autopilots. The 1001, 1101 and 1201 Autopilots will support one Expander where as the 2001 will support two Expanders. Up to 4 remotes can be plugged into each Remote Expander. |
||
